͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏ ͏
Check out the mills, lathes, and drill presses available...
Discontinued products, sample products, returned products (damaged packaging), repaired products, etc. all sold and a significantly discounted price!
Full condition is in description, and everything comes with a full warranty.
SHOP CLEARANCE
|
|
|
|
|
|
Indicator Holder for OXA Quick Change Tool Post
|
|
This week's special is from our friend Pete “KWICK” Aronson...
Indicator holder for a OXA QCTP helps you quickly and easily center your workpiece in your lathe chuck or to measure dimensions and runout.
This unit is much faster to install and more rigid than a magnetic base indicator holder. It is the best way to align a work piece in 4-jaw chucks. Doesn't tie up a tool holder like some other indicator mounts. Mounts on any standard OXA tool post. Holds a standard dial indicator with a 2-21/4” face, lug back and 3/8” shank.
Made from PETG Filament (Polyethylene Terephthalate Glycol) which is extremely durable, impact resistant, and chemical resistant.
***DIAL INDICATOR NOT INCLUDED.
|
| |
|
|
|
|
Special of the Week: $19.95
|
*Special of the Week pricing valid through 8/25/2026
|
|
|
|
|
See more Indicator Arms & Holders
What about Dial Indicators
Whatever you need LittleMachineShop.com
has you covered...
If this Special of the Week isn't what you need, wait 'til next week, when we send another missive your way. Have a good week!
Sincerely,
Scott
|
|
|
|
|
© LittleMachineShop.com
396 W Washington Blvd ste 500, Pasadena, United States, 91103
This email was sent to [[contact.email]] because you've subscribed on our site or made a purchase.
Edit preferences | Unsubscribe
|
|
|
|
|
|
|
|
