Special of the Week: Mini Lathe Plinth Block

Now just $19.95 for this LittleMachineShop.com exclusive

NEW PRODUCTS

SALE ITEMS

TOP BRANDS

New Product Alert:

7/16 T-Slot Chip Guards

LittleMachineShop.com's 7/16" high-temperature silicone T-slot chip guards are designed specifically for the smaller t-slots in most bench top machines. If your machines t-slots are 7/16" (12mm) than you have finally found the right size for your machine!

The T-slot chip guards is designed to save you time and improve performance! Chips filling the t-slots on your machine has always been a problem, but blowing them out can be dangerous, brushing is time consuming and leaving them can impact your setups and measurements.

LEARN MORE

Special of the Week

Mini Lathe Plinth Block

This steel mini lathe plinth block will add rigidity to our tool post mounting. It replaces the compound rest, and you mount a standard OXA quick change tool post (QCTP) directly to it!

The plinth block must be used with a quick-change tool post. It will not work with the standard 4-way tool post. This is not as tall as the compound rest so that tool holders are in the middle of the adjustment range on quick change tool posts. (2) M6x25 Socket Head Cap Screws are included.

- Mount with the two threaded holes toward the chuck.
- Use the inside threaded hole for small work.
- Use the outside threaded hole for large work.
- Use the center threaded hole for full support when the tool post is at an odd angle.

The mini lathe plinth block is designed by and manufactured exclusively for LittleMachineShop.com. It will fit HiTorque mini lathes as well as SIEG C2/SC2 and C3 mini lathes including popular models sold by Harbor Freight, WEN, Micro-Mark, Grizzly and others.